skip to Main Content
(407) 971-6049   (407) 366-3314   info@eaglebaywood.com

WOOD VENEERS & EDGE BANDING

Wood Veneer

Wood Veneers of various species

Veneer is a thin slice of real wood, therefore is acts like wood, will stain or paint like wood & will stain up to match other wood products in your project.

If you need to cover a large area, veneer is easy to seam. Edges are cut straight at factory or cut pieces can be trimmed straight with the use of a straight edge & a sharp utility knife.
Veneer can be wrapped around curves & angles with ease. Veneer is intended to be applied to a solid surface; veneer alone, without being applied to a rigid surface, is not suggested.

When applying veneer, be sure to clean all surfaces with a quality degreaser cleaner. Do not use mineral spirits to clean surfaces.

HOT MELT GLUE BACKED

Hot Melt Glue Backed items have a dry glue on the back of the product that is activated by heat. This product has superior holding power, can be reheated for removal or reposition & works well on uneven or rough surfaces. A common household iron or heat gun are the tools of choice for applying this product. We suggest that you only apply finishes to this item after it is installed.

PSA or PEEL & STICK BACK (PSA = Pressure Sensitive Adhesive)

PSA is a peel & stick 3M product with incredible holding power. Simply peel off the wax paper backing to expose a layer of glue. Sheets or strips are easily applied to existing cabinet faces, ends, etc. A utility knife, stiff plastic scraper (putty knife) and a pair of sharp scissors are generally the only tools required for installation of this product. This product does not bond well to unfinished wood & as always surfaces must be thoroughly cleaned to achieve long lasting results. This product can be prefinished prior to installation. Detailed instructions are included with P.S.A. sheets.

APPLICATION TIPS FOR PSA VENEER SHEETS

Wood Veneers - Edge Banding

Wood Veneers

PAPER BACKED & FLEECE BACKED

Paper Backed & Fleece Backed items require the use of contact cement or other bonding agent of your choice. Contact cement is available at most hardware stores & directions for use of these adhesives are on the can. If you use contact cement be sure the product can be applied with roller or brush & don’t forget to pick up some disposable brushes or rollers & a disposable tray. Many stores also carry contact adhesive in a convenient spray can, our own tests have shown that 3M Spray 90 works well for most applications. This product can be pre-finished prior to installation. Thickness of paper backed and fleece backed items is 10 mils. (approx thickness of 2 business cards)

WOOD ON WOOD (aka WOW)

Wood on wood laminate is composed of two wood veneer faces permanently bonded with the grain of the face running perpendicular to the grain on the back. The result is a dimensionally stable product which minimizes the wood veneer’s natural tendency to expand and contract across the grain. There is no bubbling with the W.O.W. There is no cracking or checking and no lines from the phenolic or foil backer like before.

WOW Veneer Application Tips


For cut types see our PLYWOOD & VENEER INFORMATION Section (under construction)
For information on various grades of material see our how veneers are graded

Items on this page are not discounted.

 


Prices for Finishing Veneers

(Prices subject to change without notice)

Item #17506 Clear Finish Only: $3.00 per square foot

Item #17507 Stain and Clear Top Coat: $5.25 per square foot
Item #17508 Basic Stain with Basic Glaze & Top Coat: $8.50 per sq ft


Veneer Sheets & Custom Cut Sizes

SpecieItem #P.S.A Backed 4′ wide x 8′ longItem #

Paper Backed
4′ wide x 8′ long

Red Oak

15206$116.1615226$69.60

Cherry

15208$143.3615228$96.80

Maple

15207$124.1615227$77.60
Many other domestic and exotic veneers are available from Afromasia to Zebrawood

Contact us for information.

(Prices subject to change without notice)

 


Wood Over Wood Laminate (WOW)

(Prices subject to change without notice)

If you have ever had problems laminating paper, foil or phenolic backed veneers, we have a solution for you. Wood Over Wood laminate is composed of two wood veneer faces permanently bonded with the grain of the face running perpendicular to the grain of the back. 4′ x 10′ available call for pricing.

• No Bubbling
• No Checking and Cracking
• No Phenolic or Foil Backer Lines

SPECIE

PRICE

ITEM NUMBER

SIZE

Red Oak

$100.00

15214

4′ x 8′

Maple

$112.80

15215

4′ x 8′

Cherry

$124.00

15213

4′ x 8′


Veneer Edge Banding

• Sold by the piece

(Prices subject to change without notice)

• Each piece is 7/8″ wide x 96″ long

Specie

Item#

Hot Melt Glue

Item#

Fleece back non glued

Red Oak

15229

$2.30

15235

$1.70

Maple

15230

$2.50

15236

$1.90

Cherry

15231

$2.60

15237

$2.00
Other species readily available, contact us.

Veneer Edge Banding 7/8″ Wide

Sold by 250 or 500 foot roll only

(Prices subject to change without notice)

• Finishing of a full roll is not available

Specie

Item #

Hot Melt Glue
250′ Roll
P.S.A not available in rolls

Item #

Fleeceback non glued / 500′ Roll

Red Oak

15238

$57.50

N/A

15241

$85.00

Maple

15239

$62.50

N/A

15242

$95.00

Cherry

15240

$65.00

N/A

15243

$99.00
Other species readily available, contact us.

Back To Top