(407) 971-6049   (407) 366-3314    info@eaglebaywood.com

 

Blum Tandem  Full Extension Concealed Undermount Drawer Slides

75 lb. Rating, (100 lb. static)

Our full extension drawer slides mount directly to the side of your cabinet and connect to the side of the drawer. They require 1/2″ clearance on each side and are 1 3/4″ tall. Sold in pairs.
Blum Undermount Drawer Slide Notching

Drawer Notched to accept concealed undermount drawer slides

Our undermount, full extension drawer slides mount directly to the side of your cabinet and connect to the under side of the drawer. These slides require a notch & mounting hole to be drilled in the rear of the drawer for mounting. If you are ordering dovetail drawer boxes from us, we can provide the notching & pilot hole boring service. Order item number: Blum Notch ($7.50/box)


Blum Undermount Slides

Blum Tandem Concealed Undermount Drawer Slides are available with BluMotion soft-close technology.

Blum Tandem Slides come in 4 lengths. Since the slide is totally concealed (see picture above-left) then the length of the slide & the length of the drawer must be compatible. Use the information below to match slide length to a drawer length.

  • To calculate drawer width when you know your opening width use the information below.
  • If your drawer side thickness is 5/8″ (like ours) deduct 3/8″ from your opening.
  • If your drawer side thickness is 9/16″ deduct 9/16″ from your opening.
  • If your drawer side thickness is 1/2″ deduct 5/8″ from your opening.
Please note that these are sold in pairs. One complete set INCLUDES two slides (of size ordered) AND two locking devices (left and right).

 

#DSUM21 Kit
21 1/2″ Drawer Slides and Locking Devices
Drawer must be 21″ long

Minimum inside depth clearance is 21 7/8″
TANDEM 562H $40.50
TANDEM 562H Plus Blumotion $44.50
#DSUM18 Kit
18 1/2″ Drawer Slides and Locking Devices

Drawer must be 18″ long

Minimum inside depth clearance is 18 7/8″
TANDEM 562H $33.50
TANDEM 562H Plus Blumotion $38.50
#DSUM15 Kit
15 1/2″ Drawer Slides and Locking Devices

Drawer  must be 15″ long

Minimum inside depth clearance is 15 7/8″
TANDEM 562H $32.50
TANDEM 562H Plus Blumotion $37.50
#DSUM12 Kit
12 1/2″ Drawer Slides and Locking Devices

Drawer must be 12″long

Minimum inside depth clearance is 12 7/8″
TANDEM 562H $32.50
TANDEM 562H Plus Blumotion $37.50

#DSUM-Socket (Rear Mounting Sockets)

These sockets mount onto the rear of the slide & will allow 3/16″ to 1 7/8″ of flexibility in mounting. They are intended for face frame mount,  floor mount or center drawer mount  applications only.

Blum Tandem drawer slide installation diagram

Use a 5/32″ (4mm) set back when installing Tandem Slides. The optional rear brackets will make a framed cabinetry installation easier.